background image

 

11 

A

PPENDIX 

A - S

PECIFICATIONS

 

 
This appendix lists the specifications for the IRV-3702 All-In-One Single Board Computer. 
 

CPU: 

Supports: Intel Celeron processors up to 500MHz, 66MHz or 100MHz clock. 

Co-processor: 

Internal to the Celeron Chip 

Memory: 

System Memory Expandable to 1G-bytes. Supports: 8MB, 16MB, 32MB, 64MB, 
128MB, or 256MB SDRAM DIMMs using four 168-pin DIMM sockets.  
128K-bytes of L2 Cache Memory internal to CPU. 

BIOS: 

AMI Plug-n-Play BIOS Flash EPROM. 

Clock/Cal: 

PC/AT Compatible with internal Lithium battery back-up 

I/O Bus: 

IBM PC/AT Compatible  98-pin Edge Connector 

PCI Bus: 

Industry Standard version 2.1 PICMG high performance I/O bus. 

DMA: 

7 Channels (4 8-bit & 3 16-bit) PCI Ultra DMA/33 

Timers: 

3 Programmable 

Interrupts: 

16 

Reset: 

Controlled by on-board power detector with provisions for external reset switch at 
header CN7 

I/O Ports: 

2 - RS-232 Serial Ports (CN12 at rear connector, and CN11 header)  
1 - Parallel Printer Port (at connector CN4)  
1 - PS2 Keyboard Port (at header CN8 and at rear PS2 type connector CN18) 
1 - On-board Speaker with Speaker Port (CN7)  
1 - Dual 3.5"/5.25" Floppy Disk Port (CN2) 
2 - IDE Hard Disk Port (Primary at CN1 & Secondary at CN3)  
1 - WatchDog Timer  
1 - PS2 Mouse Port (CN18 and header CN17) 
1 - IDE LED Port (CN7) 
1 - Keylock & Power LED (CN7) 
2 - Universal Serial Bus Ports (at header CN9) 
1 - IrDA Infrared Port (CN6) 
1 - Ethernet Port, RJ-45 connector (CN10), LAN LED (CN5) 
3 – Cooling Fan Power/Status Ports (CN13-CN15) 

PCI Video Port: 

1 - PCI VGA Video Port (at rear connector J1) 
     Chipset:  S3 Trio 3D Video Controller 
     VRAM: 4MB  SDRAM 
     Resolution: 1600 x 1200 64K color  
                          1280 x 1024, 64K color  
                            1024 x 768 16M color 

Speed: 

300-650MHz jumper selectable.  

Battery: 

Clock/Calendar with Internal Lithium battery (ten year life typical) 

Benchmark: 

LANDMARK v2.0 = 2337MHz  for 400MHz CPU 

Size: 

Full Size AT board 13.3"L X 4.8"H  

Weight: 

12 Oz. 

Power: 

+5VDC @ 5.5A, +12VDC @ 0.160A, -12VDC @ 0.060A   

 
 
 

Summary of Contents for IRV-3702



























Reviews: