7
©2021 Micro-Air Corp
August 2, 2021, revision 1.4
Operating the thermostat
Main screen
1.
Inside temperature shows the ambient temperature of
the room.
2.
WIFI indicator shows the state of the WIFI connection.
Green indicates WIFI is connected properly, Red
indicates connection to router only, bars indicate signal
strength, and no symbol indicates no connection.
3.
Raise and lower the temperature set point using the
red and blue arrows.
4.
Use the power button to turn the system on or off.
Button is red for off and green for on.
5.
Pressing the mode icon changes from cooling or
heating modes depending on what is available in your system. See table 2 for a list of all possible
modes.
Table 2
6.
Pressing the fan icon selects between manual (always on) fan speeds and automatic fan speeds.
Automatic will turn the fan off after the heating or cooling cycle is completed. See table 3 for
available fan speeds.
Icon
Action
Icon
Action
Fan only
Automatic cool/heat strip
Cool Only
Automatic cool/furnace
Furnace
Automatic cool/heat pump
Heat strip
Heat pump
Zone off
Aqua Heat
mode (future
option)
Zone on
