background image

Micrel, Inc.

 

MIC28510 4A Evaluation Board

 

  

March 2012

 

14 

M9999-030712

[email protected]

 or (408) 955-1690

 

 
 
 

 

 

 

MICREL, INC.   2180 FORTUNE DRIVE   SAN JOSE, CA  95131   USA

TEL +1 (408) 944-0800  FAX +1 (408) 474-1000  WEB 

 

://www.micrel.com

http

  

 

Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This 

information is not intended as a warranty and Micrel does not assume responsibility for its use.  Micrel reserves the right to change circuitry, 

specifications and descriptions at any time without notice.  No license, whether express, implied, arising by estoppel or otherwise, to any intellectual 

property rights is granted by this document.  Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no 

liability whatsoever, and Micrel disclaims any express or implied warranty relating to the sale and/or use of Micrel products including liability or 

warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. 

 

Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a 

product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for 

surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury 

to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and 

Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. 

 

© 2012 Micrel, Incorporated.

Summary of Contents for mic28510















Reviews: