KSZ9031MNX-EVAL Board User’s Guide
Micrel, Inc.
August 17, 2012
Rev.
1.0
14/23
5.0
Micrel MdioConfig
Software – Installation
The Micrel MDIO Configuration Software (
MdioConfig.exe
program) runs on a PC/NOTEBOOK
with the Window XP or 7 Operating System. It communicates with the KSZ9031MNX-EVAL board
via USB to provide programming access to the KSZ9031MNX device’s PHY registers.
The Micrel software is provided in a Microsoft Windows Installer installation package file (*.msi
file) with the following file name.
MicrelSwitchPhyQATools_x.xx.msi
// where x.xx is the release version number
5.1 MicrelSwitchPhyQATools
Installation
Before running the
MicrelSwitchPhyQATools
installation, make sure previously installed version
of the
MicrelSwitchPhyQATools
software has been removed and the USB cable to the
KSZ9031MNX-EVAL board is unplugged.
To unpack the
MicrelSwitchPhyQATools_x.xx.msi
file and start the installation, double click on
the file name from Windows Explorer, and proceed with the following steps:
1. At the “
Welcome”
screen, press the
Next>
button.
