8
2.3 Pairing miCoach X_CELL with your smartphone
Before pairing your miCoach X_CELL, make sure Bluetooth® is enabled in your smartphone
’s
settings.
Once you have enabled Bluetooth® on your smartphone, pair your miCoach X_CELL with your
smartphone. To do this:
Make sure you’re wearing the miCoach X_CELL correctly (see section 2.2 for details).
Activate Bluetooth® connection in miCoach X_CELL by
a “quick press” of the ON/OFF
button (see 1.1 for diagram).
2. Open the miCoach Sports
App, go to Settings, select “Sensors” and add miCoach
X_CELL.
Note1:
The miCoach Sports App searches for all X_CELLs (all Bluetooth® Smart devices)
within range (2,5 meters). Make sure to select your miCoach X_CELL.
Note2
: In heart rate mode the miCoach X_CELL will automatically return to ultra-low power
sleep mode when the device is no longer stimulated by your heartbeat.
Trouble-shooting:
If pairing fails, try the following:
1.
Make sure you’re wearing the miCoach X_CELL correctly (see section 2.2 for details).
2. Ensure that your miCoach X_CELL is in range and there is no other miCoach X_CELL in
the same range (<2.5 meters).
3. In the case that your X_CELL device is close to other X_CELL devices, check once you
have connected the device, that the serial number in the App matches the serial number
in the back cover of the device.
4. If the miCoach X_CELL is
still not detected, you may need to replace the battery (see
section 4 for instructions)
2.4 Working out with miCoach X_CELL and your Smartphone
miCoach X_CELL can be used in two modes:
