HygroSmart I7000XP User’s Manual
2
97481 Issue 1, January 2015
INSTALLATION
2
INSTALLATION
2.1
Unpacking the Instrument
On delivery please check that all the following components are present in the packing
box:
•
HygroSmart I7000XP interchangeable sensor
•
Certificate of calibration
•
User’s manual
2.2
Choice of the Site of Installation
The installation site choice for the sensor, or the transmitter which incorporates the
sensor, must be made bearing in mind the effectiveness of air circulation. The point at
which the sensor is installed must be typical of the surrounding environment where the
measurements of relative humidity are to be taken.
The following should be
avoided
in keeping with good instrumentation practice:
•
Installation location not representative of measuring conditions
•
Installation location adjacent to high power sources
The operating envelope of the measurement probe is detailed in the following operating
graph:
25
-40
0
50
25
70 85
75
50
100
RH%
Temp °C
Maximum mixing ratio
250g water/kg dry air
Figure 1
Operating Graph
Summary of Contents for HygroSmart I7000XP
Page 26: ...http www michell com...
