12
English
1
SAFETY INSTRUCTIONS
1.1
The appliance you have purchased is a technologically advanced
product designed by one of the leading European manufacturers
of high pressure pumps. To obtain the best performance from
your unit, read this booklet carefully and follow the instructions
each time you use it. During connection, use and servicing of
the appliance, take all possible precautions to protect your own
safety and that of the people in the immediate vicinity. Read the
safety regulations carefully and comply with them on all occasions;
failure to do so may put health and safety at risk or cause expensive
damage.
2
SAFETY RULES/RESIDUAL RISKS
2.1
SAFETY “DO NOT'S”
2.1.1
e
xplosion
or
poisoning
hazard
.
DO NOT use the appliance with
inflammable or toxic liquids, or any products which are not
compatible with the correct operation of the appliance.
2.1.2
i
njury
hazard
.
DO NOT direct the water jet towards
people or animals.
2.1.3
e
lectric
shock
hazard
.
DO NOT direct the water jet
towards the unit itself, electrical parts or towards
other electrical equipment.
2.1.4
i
njury
hazard
.
DO NOT allow children or incompetent
persons to use the appliance.
2.1.5
e
xplosion
hazard
.
DO NOT use the appliance if the
high pressure hose is damaged.
2.1.6
a
ccident
hazard
.
DO NOT jam the trigger in the operating
position.
2.1.7
a
ccident
hazard
.
Check that the data plates are affixed to
the appliance, if not, inform your dealer. Units without
plates must NOT be used as they are unidentifiable and potentially
dangerous.
2.1.8
e
xplosion
hazard
.
DO NOT tamper with or adjust
the setting of the safety valve or the safety devices.
2.1.9
h
azardous
alteration
of
operating
performance
.
DO NOT
alter the original diameter of the spray head nozzle.
2.1.10
a
ccident
hazard
.
DO NOT leave the appliance unattended.
2.1.11
Make sure that cars do not drive over the high pressure hose.
2.1.12
e
xplosion
hazard
.
DO NOT move the appliance by
pulling on the high pressure hose.
2.1.13
e
xplosion
hazard
.
When directed towards tyres,
tyre valves or other pressurised components, the high pressure jet
is potentially dangerous. Do not use the rotating nozzle kit, and
always keep the jet at a distance of at least 30 cm during cleaning.
2.1.14
s
uffocation
hazard
.
DO NOT use the appliance
indoors without sufficient ventilation.
2.2
SAFETY “MUSTS”
2.2.1
s
hort
circuit
hazard
.
All electrical conductors MUST BE
PROTECTED against the water jet.
2.2.2
i
njury
hazard
.
High pressure may cause parts to rebound: wear
all the protective clothing and equipment needed to ensure the
operator’s safety.
2.2.3
i
njury
hazard
.
Before pressing the trigger, GRIP the gun
firmly to counteract the recoil.
2.2.4
c
ontamination
hazard
.
COMPLY WITH the
requirements of the local water supply company.
According to DIN 1988, the appliance may only be connected to
the mains drinking water supply if a backflow preventer valve with
drain facility is installed in the supply hose.
2.2.5
i
njury
hazard
.
DISCHARGE residual pressure before
disconnecting the unit hose.
2.2.6
a
ccident
hazard
.
Before using the appliance, CHECK every
time that the screws are fully tightened and that there are
no broken or worn parts.
2.2.7
e
xplosion
and
electric
shock
hazard
.
ONLY USE detergents
which will not corrode the coating materials of the high pressure
hose/electrical cable.
2.2.8
i
njury
hazard
.
ENSURE that all people or animals
keep a minimum distance of 16 yd. (15m) away.
Summary of Contents for MPX 200 THO
