operating
instructions
mpx
1700
12
inlet
filter
cleaning
instructions
power
cord
reel
instructions
(
power
cord
reel
is
for
storage
only
)
32. Continue guiding cord back and
forth until entire cord is on the
reel.
A clogged or partially clogged noz-
zle can cause a significant reduction
of water coming out of the nozzle
and cause the unit to pulsate while
spraying.
To clean out the nozzle:
‧
∙
Turn off the unit.
‧
∙
Turn off the water supply.
‧‧
∙
Relieve any pressure trapped in
33. Push handle in to lock reel.
the hose by squeezing the trig-
ger 2 - 3 times.
‧
∙
Separate lance from gun.
‧
∙
Rotate nozzle to the narrow
stream setting. This opens up
the fan blades.
‧
∙
Using the tip cleaner included,
insert it into the nozzle hole and
move back and forth until debris
is dislodged.
‧
∙
Remove additional debris by
back-flushing water through
the nozzle. To do this, place end
of garden hose (with water run-
ning) to tip of nozzle pushing
water and debris out the back
opening of the lance.
nozzle
cleaning
instructions
L
To clean out the filter:
‧
∙
Turn off the unit.
‧
∙
Turn off the water supply.
‧‧
∙
Remove the inlet adapter with
filter from the pump.
‧‧
∙
Use a suitable tool to gently re-
move the filter (L), taking care
not to damage the filter.
A clogged filter may cause pulsate
spraying or reduction of flow.
CHECK AND
CLEAN THE
FILTER AFTER
EVERY USE
CHECK AND
CLEAN THE
FILTER AFTER
EVERY USE
mpx1700_en.indd 12
22/02/10 09:06
