3
OPERATION
Work Light:
• To turn ON: press the button on the left.
• To dim, press and hold until desired brightness is reached. Light will flash
when at lowest setting.
• To increase brightness, press and hold until desired brightness is reached.
• To turn OFF: press the power button.
Hazard Light
• To turn ON: press the
button on the right.
• 1x for solid-on
• 2x for flash
• 3x for triple pulse
• To turn OFF: press the power button.
The battery status indicators illuminate when the light is in use.
CHARGING THE INTERNAL BATTERY:
Please charge before initial use. In order to keep the charge, be sure to fully
recharge the unit every 6-12 months, even if the unit has not been used.
1. Locate the attached USB cord on the side and plug into a USB power port
such as a USB wall charger, USB car charger or power bank.
2. The charge indicator LEDs will illuminate to show the level of charge
(25%-100%). While recharging, the next LED will flash, followed by the
next until fully charged. It is fully charged when all 4 LEDs illuminate solid.
3. Return the USB cord into its storage location.
