Michael Todd HAIR ERASER, Instructions For Use Manual

Page: 15 / 22

HAIR ERASER | 13
CLEANING AND MAINTENANCE
CAUTION: Never rinse the adapter or the device itself with water or any other
liquid.
• Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone, etc, to clean the device.
• Make sure the device is switched off and unplugged before cleansing.
• Clean the device with the brush supplied or with a moist cloth after each
use.
Cleaning the Epilator Head
• Clean the Epilator Head after each use.
• Make sure the device is switched off and unplugged
• Remove the Epilator Head. Press the release button (1) and move the
Epilator head in the direction of the arrow (2) (Pg 12, Fig 4).
• Clean all accessible parts, including the bottom of the Epilator Head and
the Epilator discs, with the brush (Pg 12, Fig. 7).
• You can also rinse the Epilator Head (not the device!) under the tap to
clean it more thoroughly (Pg 12, Fig. 8).
• Never try to detach the Epilator discs from the Epilator Head.
• Place the Epilator Head on the device and press it until it snaps (‘click’)
(Pg 12, Fig. 9).
• The Epilator Head only fits onto the device in one way.
Cleaning the Clipping Head
• Clean the Clipping Head after every use.
• Make sure the device is switched off and unplugged.
• Remove the Clipping Head.
• Pull the cutter unit out of the Clipping Head (Pg 12, Fig. 10).