HAIR ERASER
|
9
CHARGING THE BATTERY
•
This device is both cord and cordless.
•
You can use it without the cord when the batteries have been charged.
•
Charge the batteries at least 10 hours before you use the device for
cordless operating time of up to 35 minutes.
•
Do not charge the device for more than 24 hours.
•
Make sure the device is switched off while charging.
•
Insert the device plug into the bottom of the device and put the adapter
in the wall socket. The charging light goes on and stays on to indicate
that the device is charging.
•
The charging light does not go out or change color when the device is
fully charged.
•
After you have charged the device for the first time, do not recharge
it between epilating or clipping sessions. Continue to use it and only
recharge it when the battery is (almost) empty.
•
Discharge the battery completely twice a year by letting the motor run
until it stops.
•
Do not keep the device plugged into a wall socket all the time.
•
If the device has not been used for a long time it must be recharged 10
hours.
Summary of Contents for HAIR ERASER
Page 1: ...hair eraser SATIN SMOOTH SYSTEM INSTRUCTIONS FOR USE...
Page 2: ......
Page 14: ...12 HAIR ERASER...
Page 22: ......
