To remove the mounting hole cover (Fig. 1B), unscrew it from the speaker using a counter clockwise
motion.
Once the cover is removed take the Shower Mount (Fig. 3A) and twist it 90 degrees in a clockwise motion
into the accessories mounting hole (Fig. 3C). Make sure the mount is securely attached to the speaker.
Next attach the suction cup to the shower wall or door by using a firm push to gain a suction hold.
For best results only attach to a clean, dry and non-porous surface such as glass, metal or smooth tile.
(Fig. 3D)
CARE & PRECAUTIONS:
1. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that
produce heat.
2. For protection during lightning storm, unplug the speakers from the electrical outlet and turn off the
computer.
3. Unplug this apparatus when unused for long periods of time.
4. Place the eXtreme SPX in a stable location so that it will not fall causing damage to the speakers or
bodily harm.
5. Though the unit is waterproof and it floats when the CAP is properly closed, the unit is NOT designed
for underwater use. Do not intentionally submerge the unit in water.
6. Close the CAP properly before use, tightly screw in the CAP clockwise. If the unit is placed in water
without the cap properly closed, water may leak into the unit and void your warranty.
7. Dry unit completely before opening the cap. Do NOT open the cap if wet or in a wet environment.
8. Do NOT attach the speaker with the suction cup screwed in, to a porous, wet or dusty surface.
9. Do NOT use or store the unit in places with high temperature.
10. Avoid direct exposure to sunlight and strong magnetic fields.
11. Periodically check the rubber gasket ring on the unit for premature wear.
12. Periodically clean the rubber gasket ring with a soft moist cloth. Do not use any oily solvent or chemi-
cals for cleaning.
13. Rinse off the unit with tap water after use in salt water or swimming pool.
14. Audio distortion may occur when the batteries are nearing end of charge.
15. Avoid hard impact of the handle bar when a speaker is attached on the bike mount; the speaker may
be detached & damaged.
Technical Specifications:
Output Power: RMS 6W (3 Watt x 2 speakers /4 ohms)
Frequency
Range:
80Hz-18,000Hz
Unit Size: 7 x 6.5 x 20.4cm; Unit Weight: 800g
Power Source: Lithium Polymer 3.7V 1000 mAh Battery
Playtime: Up to 5 Hours
Charging Time: Approximately 2.5 hours
Charging Options: Micro USB to AC adapter or Computer
Waterproof Rating: IPX7 - Immersion for 30 min at a depth of 1 meter.
Support
Further details and answers to common questions are found at www.miccus.com/support. If your question
is not answered feel free to email us at [email protected]. Please include the product name in your
email subject line. For live technical assistance please call 1(616) 604-4449 on Monday thru Friday,
11am-4pm EST.
FCC Information:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received; including interference that may cause undesired operation. Federal Communications Commissi-
on (FCC) Statement:
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interferen-
ce by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME
OR OFFICE USE. This equipment complies with FCC RF radiation exposure limits set forth for an uncont-
rolled environment. & This device and its antenna(s)must not be co-located or conjunction with any other
antenna or transmitter.
©2014 Miccus, Inc. All rights reserved. Bluetooth is a trademark of the Bluetooth SIG and used under
license. Made in China to Miccus specifications.
5
6
