CAP & USB CHARGING CONNECTION:
Rubber gasket Ring Micro USB Charging Socket
Top of the unit Protective Cap
The Micro USB charging port is located under the Protective Cap. Unscrew the Protective Cap in a counter
clockwise motion to gain access.
Warning:
If the Protective Cap is off or loosely secured then the speaker is NOT watertight and can cause damage to
the speaker. To maintain a watertight seal, make sure the Protective Cap is attached firmly to the top of the
speaker
Charging the Battery
The built-in Lithium Ion battery uses the included USB cable to recharge; for optimal charging connect the
USB cable to your computer or any USB wall or car adapter that outputs a minimum of 5V @1Amp or
higher. The red LED will be solid during charging and turn off when charging is complete. Playtime lasts up
to 5 hours on a full charge. When battery energy is low, a voice will indicate “Battery Low” with 30 minutes
of approximate playtime remaining.
BACK OF UNIT
Accessories Mounting Hole
Mounting Hole Cover
(Fig. 1A)
(Fig. 1B)
3
How to use the Bike Mount Kit:
Speaker Mount Bike Handlebar Mount
(Fig. 2A) (Fig. 2B)
(Fig. 2C)
To remove the mounting hole cover (Fig. 1B), unscrew it from the speaker using a counter clockwise
motion.
Once the cover is removed take the Speaker Mount (Fig. 2A) and twist it 90 degrees in a clockwise
motion into the accessories mounting hole (Fig. 1A)
To attach the Bike Handlebar mount (Fig. 2B) to your bicycle, remove the mount screw with a No.2
philips screw driver. Open the Bike Mount and position on your handlebars keeping in mind the overall
size of the speaker. Re-insert the mount screw and tighten until firm (Fig.2C). Once secured the Handle-
bar Mount should not rotate or move on the handlebars..
Next take the speaker and slide the open end of the Speaker Mount (Fig. 2A) onto the Bike Handlebar
Mount (Fig. 2B). Push the speaker mount all the way until it clicks securely into place. To remove the
speaker from the Bike Mount press the button on the Bike Mount and slide the speaker off.
How to use the Shower Mount Kit:
Shower Mount
(Fig. 3A) (Fig. 3B) (Fig. 3C) (Fig. 3D)
4
