Copyright © 2009-2018 Micca. All rights reserved.
Page | 2
2 Setup and Usage
The Micca LB-DAC is an optical digital audio decoder and Bluetooth transmitter that can
remember up to eight Bluetooth headphones or speakers, and can transmit to up to two devices
at the same time. Follow the steps below for setup and configuration of the LB-DAC.
2.1 Bluetooth Paring
2.1.1 To pair the LB-DAC with a Bluetooth headphone or speaker:
•
Turn on the LB-DAC.
•
Place the headphone or speaker into pairing mode.
•
Press and hold the LB-DAC Bluetooth button for 2 seconds to enter pairing mode. The
blue “Pair” indicator light on the LB-DAC will flash quickly.
•
Wait up to 60 seconds for the pairing to complete. Blue “Pair” indicator light on the LB-
DAC will become solid when paired and connected.
2.1.2 To pair with additional Bluetooth headphones or speakers:
•
Turn off any headphones or speakers that were previously paired with the LB-DAC
•
Turn on the LB-DAC.
•
Place the additional pair of Bluetooth headphones or speakers into pairing mode.
•
Press and hold the LB-DAC Bluetooth button for 2 seconds to enter pairing mode. The
blue “Pair” indicator light on the LB-DAC will flash quickly.
•
Wait up to 60 seconds for the pairing to complete. Blue “Pair” indicator light on the LB-
DAC will become solid when paired and connected.
2.1.3 To listen to two pairs of Bluetooth headphones at the same time:
•
Ensure that both headphones have been previously paired with the LB-DAC.
•
Turn on the LB-DAC.
•
Turn on both headphones, and wait for up to 60 seconds for both headphones to
connect.
•
If the LB-DAC has previously been paired with more than two pairs of headphones, make
sure that no more than two headphones are turned on at any time.
2.1.4 To clear the paired device memory:
•
Turn on the LB-DAC
•
Press and hold the LB-DAC Bluetooth button for 7 seconds. The blue “Pair” indicator light
will flash quickly and then turn solid for 1 second.
•
The paired device memory has now been cleared.
