Copyright © 2009-2018 Micca. All rights reserved.
Page | 1
1 Product Overview
1.1 Connections and Ports
Name
Description
1
DC 5V
USB DC power input, 5V/0.5A nominal. Use any USB power
adapter (not included) or battery power bank (not included).
2
Optical Output
Optical audio output jack, used for pass-through of optical
audio input only. Analog audio input will not be converted.
3
Optical Input
Optical audio input jack. Supports PCM audio up to
192kHz/24-bit. Does not support DTS or Dolby audio.
4
Bluetooth Button
Press and hold for 2 seconds to initiate pairing. Quick press
to reconnect to last connected device.
5
Antenna
Bluetooth antenna. Use vertical orientation for best range.
6
RCA Jacks
Analog audio jacks for connecting a stereo system. Works as
output jacks in Output Mode, and input jacks in Input Mode.
7
Mode Switch
Sets the operation mode to either Input or Output Mode.
8
AUX Jack
3.5mm analog audio jacks for connecting wired headphones
in Output M
ode; f
or phones, tablets, and PCs in Input Mode.
9
Power Switch and
Volume Knob
Turns the LB-DAC on or off, and controls volume of decoded
audio in Output mode. Does not control volume of analog
audio input in Input Mode.
There are three indicator lights on the LB-DAC that
indicate the current operating status:
Green/Power
– Indicates power status.
Blue/Pair
–Bluetooth status. This light will flash quickly
in pairing mode, and turn solid when connected to a
Bluetooth headphone or speaker.
Red/Error
– Turns on when incompatible optical digital
audio is detected, or if errors have been detected in the
audio data stream.
