RedEdge-
MX
Integration Guide Rev 01
Item
Value
Nominal Voltage
3.0 V DC
Voltage Range
0.0 V DC to 5.0 V DC
Absolute Maximum Voltage
5.1 V DC
PWM Trigger Expected Range
1.0 ms to 2.0 ms
CAUTION
Care should be taken when multiple “grounds” are used for power and trigger
of the camera. Only one ground should be connected to the camera – typically
this is the ground that corresponds to the source of the power. If the ground of
the trigger signal and the ground of the power source are different, they should
not be joined together electrically at the camera. Contact
if further information is needed.
© 2018 MicaSense, Inc. Page 8 of 19
