RedEdge-
MX
Integration Guide Rev 01
6. Example Integrations
RedEdge-
MX
is designed for integration into a variety of platforms. Below are some
common integration configurations.
6.1. Standalone Integration Using Camera, DLS, GPS Module
The standalone integration option requires only that power is provided to the
RedEdge-
MX
system. Triggering is configured via the WiFi interface to either
“Overlap” or “Timer” mode. GPS information is provided by the included GPS
receiver connected to the DLS.
Automatic Capture/Triggering Options
●
RedEdge-MX supports three methods for capturing images: Overlap, Timer, and
External Trigger. To learn more about how to configure these settings, please see the
Sensor Firmware Guide.
○
Overlap Mode (Recommended)
© 2018 MicaSense, Inc. Page 14 of 19
