5
OPERATION
Before First Use
•
Do not insert the plug before installing the wheels and ensuring the heater is standing securely.
NOTE:
It is normal when the heaters are turned on for the first time or when they are turned on after having
not been used for a long period of time the heaters may emit some smells and fumes. This will disappear
when the heater has been operating for a short while.
Location
•
Place at least 1m from and curtains.
•
Keep all combustible materials such as furniture, pillows, bedding, paper, clothes and curtains at least 1m
away from heater.
•
Do not place anything on top of Heater.
•
Do not use in wet or moist locations; for example, bathrooms or laundry areas, or in areas where paint or
other flammable or volatile liquids are used or stored.
Operation
1. Set all the controls to the OFF position (0) and insert the plug into a socket-outlet that is compatible with
the rating label on the product. Be sure that plug fits firmly.
2. Rotate the thermostat knob clockwise to MAX position.
3. Turn on the power by rotating the power switch clockwise. Power output can be set to either of two power
levels: LOW (I) and HIGH (II).
4. When your room reaches the desired temperature, slowly rotate the thermostat knob counter clockwise
until the light goes out. The thermostat can now be left at this setting. As soon as the room temperature
has dropped below the set temperature, the unit will switch itself on automatically until the set temperature
has been reached again. In this way the room temperature remains constant with the most economical use
of electricity.
5. If you want to change the room temperature setting, rotate the thermostat knob clockwise to raise the
temperature, or counter clockwise to lower it.
6. This heater includes an overheat protection system that shuts off the heater when parts of the heater is
getting excessively hot.
7. To completely shut the heater off, turn all the controls to OFF (0), and remove the plug from the socket-
outlet.
