3
PARTS DETAILS
1. Power Switch
2. Thermostat
3. Control Panel
4. Rear Panel
5. Wall Mount Bracket
6. Rubber Post
7. Support Base
8. Castor
BEFORE FIRST USE
•
Before first use remove any stickers or similar from the appliance. (Except the rating label! and Do NOT
COVER warning).
•
Dispose of any plastic bags responsibly as they pose a risk to young children of suffocation.
•
Wipe the outside of the appliance with a moist cloth and dry with a towel.
ASSEMBLY
Installing the Castors
1. The heater is packaged with the feet unattached. You must attach them before operating the heater.
2. Lay the heater on a flat table with the bottom of the heater overhanging the edge slightly.
3. Align the foot and castors with the holes provided on the base of the heater.
4. Fix the feet to the heater using the screws supplied.
5. Stand the heater on its feet on a stable flat surface.
WARNING: Do not operate without feet attached. Operate the heater only in upright position (feet on
the bottom, controls on the top), any other position could create a hazardous situation.
Wall Mounting
1. Attach the mounting brackets to the wall, using the bolts and nuts (supplied).
