background image

 

Mianyang Weibo Electronics Co.,Limited 

No.98 Youxian East Road, Youxian District, Mianyang City, P.R. China 

Tel: 86-0816-2971265 Fax: 86-016-2281934 

www.weiboelectronic.cn

 

     

[email protected]

 

 

WBI417S41 TRUE RMS SENSING AC current transducer 

Safety claim 

The information in the safety claim of the equipment documentation is intended to ensure that 

equipment is properly installed in order to maintain it in a condition. 

It is assumed that everyone who will be associated with the equipment will be familiar with the contents 

of that safety section, or this safety guide. 

When electrical equipment is in operation, dangerous voltages will be present in certain parts of the 

equipment (e.g. the input terminal). Failure to obverse warning notices, incorrect use, or improper use 

may endanger personnel and equipment and course personal injury or physical damage. 

Before working in the terminal strip area, the equipment must be isolated. 

Proper and safe operation of the equipment depends on appropriate shipping and handling, proper 

storage, installation and commissioning, and on careful operation, maintenance and servicing. 

The operating manual for the equipment gives instructions for its installation, commissioning, and 

operation. However, the manual cannot cover all conceivable circumstances or include detailed 

information on all topics. In the event of questions or specific problem, do not take any action without 

proper authorization. Contact the appropriate WB technical or sales office and request the necessary 

information.  

Standard application 

1. Accuracy 

    Accurate degree is conformed to IEC688:1992 

2. Safety 

  2.1 Overload capability 

    Overload capability is conformed to IEC688:1992 

  2.2 Isolation voltage 

        Can be endured testing voltage is conformed to Q/72085584-0.1-2004 

 2.3 Insulation impedance 

        The insulation impedance is no less than 20M Ohm, is conformed to Q/72085584-0.1-2004     

3. Electromagnetic Capability   

        3.1 Electromagnetic field immunity test according to IEC 61000-4-3:1995 

        3.2 Power frequency magnetic field immunity test according to IEC 61000-4-8:1993     

Summary of Contents for WBI417S41







Reviews: