STEP 3:
STEP 4:
STEP 5:
STEP 6:
At present, the main frame of the trampo
-
line is open. The positioning of the elastic
cords is likely to be asymmetrical, adjust it
if necessary.
The mounting of the lower bar of the
handlebar is done with the M8x40 bolt and
a bow washer.
Use an Allen wrench to
secure the elements.
For mounting feet, no tools are needed. Flip the trampoline
frame so that the bouncing surface is against the floor. Plastic
end caps cover the tubes for mounting the feet. Remove these
tips and discard them. Screw the feet on the tubes and put the
trampoline back in place.
The handlebar is mounted on the upper handlebar with the M8x40
bolt and an arc washer. Use an Allen key to secure the elements.
5
