Prodomus
13
•
When it is first switched on, the grill may smell and emit some smoke. This is normal;
the grease that may have adhered to the element during manufacturing is burning off.
We therefore recommend that you heat up the grill for a few minutes without any food
(ventilate the room during this period). Always preheat your appliance on the middle
level during a few minutes before using it.
Scope of delivery
•
wind shield
•
grill container
•
reflector
•
2 grill grids
•
thermostat with heating element
•
deposit plate
•
4 stand feet
•
optionally: screws (fixing material for stand feet)
•
instruction manual
Assembly of your grill
Stand feet:
•
You will find 4 stand feet, the grill container with fixing frame at the bottom, the deposit
plate to fix your stand feet and deposit plate in the package.
First fix the deposit plate in the middle of the 4 stand feet. Then attach the fixing frame at
the bottom of the grill container on top of the stand feet. Having fixed the feet in this way
maximum stability will be ensured.
•
Before you use the grill for the first time make sure that all parts are assembled firmly
and even and the unit can not push over.
Grill:
•
Place the reflector into the grill container
•
Detach the grill grid so that you can easily insert the thermostat with the heating
element.
•
Insert the thermostat with the heating element correctly into the slot. See the guides at
the side of the thermostat and ensure to slide exactly into the slot.
•
Find the two holes at the back of the grill container and let the 2 pins underside the
heating element slide into the holes.
Note: If the thermostat with the heating element is not assembled in the correct way, the unit
will not operate! (it is protected by safety switch).
•
Now reinsert the grill grid. To adjust the height of the grill grid you can insert the feet of
the grill grid into the slots in the handles of the grill or you can put the feet onto the rim of
the slots in the handles.
•
Insert the wind protector on top of the back of the grill.
