Prodomus
17
The pusher
– tips and warning
Do not exert too much pressure on the pusher when you press ingredients down the feed
tube.
There are two kinds of pusher(a small one and a big one) for this appliance:
5. Use the big pusher to push big blocks of ingredients into the processing cup.
6. For slim material ( such as ham, cucumber, carrot etc.), put the material trough the hole of
big pusher, use the small pusher to push it. The small pusher can be taken out of the big
pusher by turning it in a anti-colckwise direction.
7. Pre-cut large ingredients to make them fit into the feed tube.
8. Fill the feed tube evenly for the best results.
Blender
– tip and warning
Always assemble the sealing ring onto the blade before you attach the blade to the blender
jar.
Do not let the appliance run more than twice without interruption. Let it cool down before you
continue processing.
Never open the lid when the blade rotates.
Built-in safety lock: you can only use the blender when the rib on the blender jar is directly
opposite the print on the motor unit.
a. To add liquid ingredients during processing, pour them into blender jar through the hold
in the lid.
b. Pre-cut solid ingredients into smaller pieces before you process them.
c. If you want to prepare a large quantity, process small batches of ingredients instead of a
large quantity at once.
d. When you process a liquid that is hot or tends to foam(e.g.milk), do not put more than 1
litre in the blender jar to avoid spillage.
If ingredients stick to the wall of the blender jar:
1. Switch off the appliance and unplug it.
2. Open the lid and use a spatula remove the ingredients from the wall of the jar.
3. Keep the spatula at a safe distance of approx.2cm from the blade.
Storage
To avoid damaged parts, never switch on the device when the accessories are stored in the
bowl.
Cleaning
Always unplug the appliance before you remove accessories or clean the motor unit.
You can quickly and easily preclean the food processor bow with the pulse button. Simply add
some water and washing-up liquid to the dirty bowl or jar and secure the lid. Then use the
pulse button until the bowl or jar is clean. When you preclean the food processor bowl in this
way, make sure the blade is assembled in the bowl.
Summary of Contents for MC 1191
Page 3: ...P r o d o m u s 3 ...
