Prodomus
16
Advantages of an induction cooking plate
Energy transfer only while cookware is put on the cooking plate = maximum energy saving
(up to ca. 50 %)
Heat is generated in the bottom of the cookware and immediately directed into the food. The
power preset is absorbed immediately into the cookware. This guarantees extremely high cooking speed.
High effectiveness during parboiling and minimum power consumption during cooking reduces
total energy consumption up to 30 %.
Precise controlling (by 3 different adjustable functions) guarantees quickly and tightly focused heat input.
Basically the cooking area stays cold, only the redirection of heat of the cooking ware warms it up.
As the induction cooking plate is only heated up by the heated cookware, the risk of scorching or
burning in of food residues is reduced. The induction cooking plate does not stay hot as long as
standard cooking plates (easy cleaning).
When the cookware is removed the device switches automatically into the Standby Mode.
The device detects whether suitable cookware is placed on the cooking plate. If not, no energy
is transmitted.
When operating the induction cooking plate with empty cookware, a temperature sensor turns
off the heating function in case of overheating.
Operating of the device
Caution! Never leave the appliance unattended when it is in operation!
Please follow the sequence below when adjusting the appliance. You can adjust power (watts)
temperature (C °degrees) and cooking time (hours/minutes)
Before plugging always place suitable cookware filled with food centred onto the induction cooking
plate. Otherwise error function will occur (see “Safety function”).
Insert the plug into a suitable socket, an acoustic signal resounds and the display shows OFF.
(now the device is in the Standby Mode).
Now press the
ON/OFF
switch to turn the device ON. A short acoustic signal resounds (whenever
you press button again or new button, a short acoustic signal resounds). The fan inside begins to
work. The display now shows
1600
(watts). This is an automatic presetting. The appliance is now
in the
power mode
. Select the desired power level higher or lower by turning the central control
knob.
To select the desired temperature press the menu button (3) until the the green controllamp
is shining on the side of °C . Now the appliance is in
temperature mode
. Select the desired
temperature level higher or lower by turning the control knob (adjustable from 60° to 240°C).
For selecting the timer mode press the menu buttonuntil the green controllamp is shining on
the side of the clock symbol. Adjust the desired cooking time by turning the central control wheel.
Cooking time will be indicated at the display by counting down the minutes. When cooking time is
finished this will be indicated by several acoustic signals. After finishing the cooking or keeping warm
process always switch off and unplug. All functions can be adjusted manually by pressing the
corresponding buttons. We recommend to follow the instructions in chapter “Operating of the appliance”.
Do not use the appliance if it shows any sign of damage or malfunction. Please contact the customer
service (see “Warranty claims”) in such case. Do not put empty cook ware on the appliance and do not
leave cookware too long on the appliance to avoid completely boiling away of the liquid. Overheating
of cookware will activate the overheating protection of the device.
Note: If the unit displays the error code E 05, it has been overheated. In this case turn off and
unplug the appliance and let it cool down completely.
Safety function
If you do not place cookware while the appliance is plugged but push the ON/OFF button, the appliance
for safety reason will not switch into heating function. In this case the display will show first 1200 and
then E0 for error.
If you remove the cookware while the appliance is in operation multiple acoustic signals will resound
