EN
29
21 - Solving Operational Problems
Before contacting service, check the following to avoid unnecessary service charges.
Oven Problem
Problem Solving Steps
Other F__ Error appears in the display window.
Remove power and turn it back on again after a few seconds. If
condition persists, note the code number (in the EVENT LOG list)
and contact service.
The oven display stays OFF
Turn off power at the main power supply (fuse or breaker box).
Turn breaker back on.
If condition persists, call an authorized service.
Cooling fan continues to run after oven is turned off
The fan turns off automatically when the electronic components
have cooled sufficiently.
Oven is not heating
Check the circuit breaker or fuse box to your house. Make sure
there is proper electrical power to the oven. Make sure the oven
temperature has been selected.
Oven is not cooking evenly
Refer to cooking charts for recommended rack position. Always
reduce recipe temperature by 25°F (15°C) when baking with
Convection Bake mode.
Oven light is not working properly
Replace or reinsert the light bulb if loose or defective. See Page
25. Avoid touching the bulb glass with bare fingers as finger oil
may cause bulbs to burn out prematurely.
Clock and timer are not working properly
Make sure there is proper electrical power to the oven.
Summary of Contents for GYV34S
Page 1: ......
Page 33: ...PRODUCT COD 2 006 79 1 DOC COD 2 006 79 1 11 16 ...
Page 34: ...2 0 1 7 0 2 G Y V 3 4 S ...