background image

Keep Warm after Lifting Kettle

Boil

Keep

Warm

Boil

Keep

Warm

Notes:

• The function of "Remember keep warm temperature after lifting kettle" is disabled by default. It is recommended to 

enable it in the app for a better user experience.

• When the function of "Remember keep warm temperature after lifting kettle" is enabled, make sure the water level in 

the kettle is above the minimum water level mark. Otherwise, there may be a risk of boil-dry.

• When placing the kettle back onto the base, ensure that the difference between the temperature of the water in the 

kettle and the set one is within 10 degrees.

• The function of "Remember keep warm temperature after lifting kettle" will be disabled when adding cold water. Press 

the keep warm button to enable this function.

• When the smart kettle is working, pressing the boil button will make it enter the standby mode.

• Simultaneously press and hold "Boil" and "Warm" buttons for 3 seconds to restore factory settings.

3. When the kettle reaches 

the set temperature, it 

will beep three times. 

The keep warm indicator 

will turn into orange, and 

the kettle will keep the 

water warm at the set 

temperature.

4. Press the keep warm 

button again to cancel 

it. The keep warm 

indicator will turn off 

and the kettle will enter 

standby mode.

Note: When the water 

temperature drops 

below 45°C in standby 

mode, the display will 

turn off after 2 minutes 

of inactivity. Press any 

button to wake up the 

kettle when the display 

is turned off.

When you lift the kettle and then place it back onto the base, the kettle can continue to work for keeping warm. The 

indicator blinks 3 times and the kettle resumes keeping warm to the set temperature. To use this function, it requires 

you set a temperature first and then enable “Remember keep warm temperature after lifting kettle” in the app.

6

Summary of Contents for MJHWSH02YM














Reviews: