Mi 82251408, User Manual

Page: 5 / 56

8 7
How to Maintain
Clean the filter cartridge
Clean the laser dust sensor
To ensure optimum operation,
use a vacuum cleaner or soft
cloth to remove any dust clinging
to air holes or housing walls.
The switch of dust sensor's
back cover is at the top of the
filter housing. Lift to open the
back cover (see Figure A).
Use an air blow gun or hair
dryer to clean the back cover
grille and sensor (see Figure B).
Make sure to turn off the air purifier and disconnect power before cleaning.
Note: Do not use hot air
.
Figure A
Figure B
Specifications
Name Mi Air Purifier 2S Rated voltage 100-240V~ PM CADR 310m
3
/h
Model AC-M4-AA Rated frequency 50/60Hz PM CCM P3
Item dimensions 240×240×520 mm Rated power 29W Formaldehyde CADR 60m 3 /h
Net weight approx. 4.5kg Noise level ≤66dB(A) Formaldehyde CCM F3
Effective coverage 21 - 37m 2 PM filtering efficiency High
Formaldehyde
filtering efficiency
High
Wireless
connectivity
Wi-Fi IEEE 802.11 b/g/n 2.4GHz Network standby power consumption < 2.0W
Regulatory compliance information
Europe — EU declaration of conformity
We Beijing Smartmi electronic technology limited, hereby, declares that this equipment
is in compliance with the applicable directives and european norms, and amendments.
Disposal and recycling information
Correct disposal of this product. This marking indicates that this product should not be
disposal with other household wastes. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used device, please use the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.