Mi-T-M HG-SERIES, Operating Instructions Manual, Page: 5 / 96

Operator's Manual 5
potential conseQuence
preVention
HaZard
Serious injury or death may occur
from inhaling burner exhaust or
dangerous vapors.
Installation of this unit including the
ventilation of the combustion gases must
comply with all local, state and national
codes. (Standards to be followed include
the National Fuel Gas Code ANSI Z223./
NFPA No. 54. In Canada; Refer to the CSA
B49. Gas Installation Code).
Always make certain there is adequate
ventilation (fresh outside air) for breathing
and combustion. This will prevent the
buildup of dangerous carbon monoxide
gases. Beware of poorly ventilated areas,
or areas with exhaust fans which can
cause poor air exchange.
If you smell gas, shut off the gas supply to
the appliance, extinguish any open flame,
and test all joints with a soap solution. If
the odor persists, call you gas supplier
immediately.
Follow all safety instructions provided with
the materials you are spraying. Use of a
respirator may be required when working
with some materials. Do not use this
pressure washer to dispense hazardous
materials.
risK of aspHyXiation
safety warnings
READ ALL SAFETY WARNINGS BEFORE INSTALLING AND USING PRESSURE WASHER