background image

Operator’s Manual   

 

 

 

 

 

       

             9

Reference #6  Decal:  Caution-Engine Fuel  (Part #34-0599)

Reference #4  Decal:  Warning-Risk of Injection  (Part #34-253)

Reference #5  Decal:  Warning-Muffler Hot  (Part #34-0598)

 
Reference #8  Decal:  Warning/Caution Statements  (Part #34-082)

safety decals

!!!DO NOT REmOvE sAfETy DECAls fROm UNIT

UNlEss REplACING WITh mOsT CURRENT sAfETy DECAl!!!

34-0599-E/S-030600-ENG

No ponga combustible cuando 

el producto este en operacion.  

Permita que el motor se enfrie 

por 2 minutos antes de 

reablastecer de combustible.

RISK OF FIRE

Do  not  add  fuel  when 
product is operating.  Allow 
engine  to  cool  for  two  (2) 
minutes before refueling. 

RIESGO DE FUEGE

CAUTION/PRECAUCION

RISK OF BURNS

MUFFLER AND

ADJACENT AREAS

MAY EXCEED 50°F.

RIESGO DE QUEMAR

EL AMORTIGUADOR Y LAS

AREAS ADYACENTES PUEDEN

TENER TEMPERATURAS POR

ARRIBA

 DE 50°F.

34-0598-00699-E/S-ENG.

WARNING

ADVERTENCIA

WARNING/ADVERTENCIA

CAUTION/PRECAUCION

•RISK OF INJECTION OR SEVERE INJURY: Keep clear of nozzle. Do not 

direct spray toward any person or self. This machine is to be used only by 

qualified operators. 

•RISK OF ASPHYXIATION: Outdoor use only required.

•RISK OF FIRE: Do not smoke while refueling. Allow to cool two to three 

minutes before refueling. Do not operate while refueling. 

•RISK OF ELECTROCUTION: Do not direct spray toward any electrical 

connections, outlets or power lines.

•RISK OF EXPLOSION: Do not spray flammable liquids or in an area 

containing combustible dust, liquids or vapors.

•RISK OF INJURY: Use only properly rated equipment.

•RIESGO DE INYECCION O LESION SEVERA: Mantenga la boquilla 

despejada. No dirija el chorro hacia persona alguna o hacia usted.

•RIESGO DE ASFIXIA: Unicamente para uso en el exterior.

•RIESGO DE FUEGO: No fume mientras este reabasteciendo de 

combustible. Permita que le motor se enfrie dos o tres minutos antes del 

reabastecimiento. No opere el productor durante el reabastecimiento.

•RIESGO DO ELECTROCUCION: No dirija el chorro hacia conexiones 

elctricas. Tomas de corriente o lineas de alimentacion de corriente.

•RIESGO DO EXPLOSION: No rocie liquidos inflammables.

•RIESGO DE LESION: Use unicamente equipo con clasificacion 

adecuada.

•TO REDUCE RISK OF INJURY: Read and understand the operation 

manual and all instructions before using.

•STAY ALERT: Hold onto gun/wand firmly with both hands to avoid 

dangerous kickbacks.

•Always wear eye protection.

•Do not overreach or stand on unstable support. Keep good footing and 

balance at all times.

•Always turn on water supply to pump before starting.

•Protect pump from freezing.

•Engage trigger safety lock-off when not in use.

•PARA REDUCIR EL RIESGO DE QUE OCURRAN LESIONS: Lea y 

entienda el manual de operacion y todas las instrucciones antes de 

usar el producto.

•PERMANIZCA ALERTA: Sostenga la pistola varilla firmenmente con 

ambas manos para evitar golpes de retorceso peligroso.

•Use siempre proteccion ocular.

•No se extienda demasiado o se pare en un apoyo inestable. Mantenga 

una buena posicion y balance todo el tiempo.

•Antes de comenzar, abra siempre el suminstro de agua a la bomba.

•Proteja la bomba de la congelacion.

•Coloque el seguro del gatillo en la posicion apagado cuando no este 

usando el producto.

34-0812-E/S-011800-ENG.

RISK OF INJECTION OR SEVERE INJURY. 

Never put your hand, fingers or body directly 

over the spray nozzle.

34-1253-030801-ENG.

WARNING

ADVERTENCIA

RIESGO DE INYECCION O LISION SEVERA

Nunca coloque la mano, los dedos o el cuerpo 

directamente sobre la boquilla de rocío.

Summary of Contents for CBA-2504




















Reviews: