4. Programming(code clearing and code matching)
Code matching:
Code clearing:
A�en�on:
For a new kit (remote & controller), the remote can work only when it is programmed to the
controller.
Please follow the below instruc�ons:
Correctly connect the power supply, LED controller and LED load.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds) the moment
you see the light is on. The LED light blinks twice slowly when it is done.
The code can be cleared as needed.
The kit (remote and controller) will stay in the original state a�er code clearing. lt can work
when code rematching is done.
Please follow the below instruc�ons:
Also, correctly connect the power supply, LED controller and LED load.
Switch off the power, then switch on again, and long press key 5 (within 3 seconds) the moment
you see the light is on. The LED light blinks nine �mes swi�ly when it is done.
1.
The regular product for sale is a kit (remote and controller). The user can re-programme
freely as needed. One remote can control countless controllers, but one controller can only
be controlled by four remotes (Max).
2. Please check whether the voltage of the power supply matches the controller and light,
and please check the connection on of both the cathode and anode before applying power.
3. Ensure supply power is off before performing any installation or wiring procedures.
4. Using the light/controller in the place with metal or concrete structures or electromagnetic
interference will cause issues with communication and communication range.
