21
Set end positions (set top/bottom end position)
Top end position
Bottom end position
Press Motor button and keep pressed.
1
Additionally, press
Open
button
2
Additionally, press
Close
button
Make sure that the
desired channel button has been
selected on the remote control.
Blind briefly moves up and down once.
Release
Motor button
.
Using the
Move buttons
,
position the blind about 20 cm
below the head rail.
Release
Motor button
.
Press
OPEN button
to move
the unit up to the head rail.
Motor stops automatically
Using the
Move buttons
, move the blind into the desired
top/bottom end position.
PowerView® I
Venetian blinds Programming Guide
1
2
EN
