MHG Heating Ltd ©
MHG Heating Ltd. Unit 4 Epsom Downs Metro Centre, Waterfield Tadworth Surrey KT20 5LR
P: 08456 448802 F: 08456 448803 E:[email protected] W:
www.mhgheating.co.uk
01/01/10
49
Installing the first collector
1. Attach the collector (1) to the front U-pieces (3.1/4.1). To do so, position the
collector with the help of a second person. Attach the outer T-piece (5.1) to the
outer U-piece (3.1) using an M10 x 85 mm hexagonal bolt (3.6), a spacer sleeve
(3.9), a spring washer (3.7) and an M10 hexagonal nut (3.8). Preassemble
the second T-piece (6.1) to the second Upiece (4.1) using an M10 x 100 mm
hexagonal bolt (4.7), a small spacer sleeve (6.3), and a large spacer sleeve (4.10).
The M10 hexagonal bolts (4.7) between two collectors are 100 mm in length.
2. Tilt the collector towards the supporting tubes. Attach the outer T-piece (5.1) to
the outer supporting tube (2) using an M10 x 85 mm hexagonal bolt (3.6), a small
spacer sleeve (5.3), a spring washer (3.7) and an M10 hexagonal nut (3.8).
Preassemble the second T-piece (6.1) using an M10 x 100 mm hexagonal bolt (4.7),
two small spacer sleeves (6.3).
Fasten both outer T-pieces in place by tightening the M10 x 85 mm hexagonal
bolts (3.6).
