EN
53
Actuating force of the handle
450 N
Number of users
2
Net weight
8.8 kg
Note: All heights are with rated load. The lifting range is without saddle
rise.
REACTION ON SUPPORTS (WHEELS) UNDER RATED LOAD
Stationary wheels
Swivelling wheels
Lower saddle
8811N
1042N
Upper saddle
5495N
4358N
MAINTENANCE OF JACK AND PROCEDURES IN THE EVENT OF FAILURE
ENSURE THAT YOU TAKE ADEQUATE PROTECTIVE MEASURES WHEN
USING THE JACK (HANDS, ARMS, etc.)
Once per year
- Bleed the air from the hydraulic unit (see corresponding section).
- Check that the screws and nuts are tight.
Problem/
Malfunction
Likely causes and solutions
The jack cannot lift
the load.
The drain plug is not tightened properly. Rotate it
clockwise.
The oil level is too low. Arrange for the jack to be
inspected by a technician. When filling oil, both the
properties of the hydraulic fluid and the quantity
must be observed.
The jack cannot
hold the load.
The drain plug is not tightened properly. Rotate it
clockwise.
The hydraulic system is dirty. Arrange for the jack
to be inspected by a technician.
