Note: Do not nick the braid, dielectric, and center conductor if at all possible. Tinning of
the center conductor is not necessary if contact is to be crimped. For solder method, tin
the center conductor if the center is stranded. twist the center conductor very tightly
prior to tinning.
Install Method Selection:
Slide the outer ferrule onto the coax as shown below. Flare the braid slightly to allow
insertion of the connector main body. Important: Do not comb out braid.
Place the center contact on the center conductor of the coax so that it butts against the
cable dielectric. The center conductor should be visible through the solder / inspection
hole of the contact. Solder contact in place as follows:
Crimp-on the Ferrule
crimp handle for the ferrule. (DO NOT CRIMP / CRUSH
THE CENTER PIN)
