Blaze FLIGHT-3 Operating Manual
Page 26
4.11 Timers Setup
Set UTC Time:
This function is used to set the internal real time clock. The time to be entered must be
UTC in order for the system to operate correctly. Do not enter local time (unless it is the
same as UTC).
UTC is the same as Greenwich Mean Time (GMT) or Zulu time.
UTC Offset:
Enter the UTC offset for your location. The UTC offset can be adjusted in half an hour increments.
RTC Trim:
This allows you to adjust a trimming factor that will increase the accuracy of the built in clock.
SET HOBBS TIME:
This function allows you to set the engine Hobbs meter to any value. Typically, you would
use this function to set the Hobbs meter to the current known engine time. Use the rotary
control to change the value. Press the rotary control to accept and exit the menu option. If
the Hobbs code is set to another value beside zero, then the pilot will be prompted to
enter the Hobbs access code before allowing him to change the Hobbs time. This feature
is useful for charted and flying school planes.
