4
“
” and “
“ buttons
: press these buttons to adjust the shock intensity from 1 to 10 level
“
”
butto
n: is the power switch. Hold this button for 4 seconds to switch on the power then LCD will display the
default “A01”. You may change the Dog ID by pressing the relative buttons. Hold this button for 4 seconds to switch
the power off.
“
”
button
: no-stimulation, just a warning buzz
“
”
button
: continuous stimulation whilst the button is held down. Maximum around 8 seconds
“
”
button
: momentary stimulation
“A,B,C ”
buttons
: Dog selection button. Default is
“A”
. Your transmitter is capable of training up to three dogs with
optional receiver collars. You select
A
dog, LCD displays dog ID “
A XX
”. If you want to train
B
dog press
“B”
button,
LCD will display “
BXX
” If you want to train
C
dog press
“C”
button and the LCD will display “
C XX
”. “
XX
” is for showing
the shock level you have set.
The transmitter will memorise the shock levels you set for the different dogs.
10 levels of continuous stimulation and 10 levels of momentary stimulation. One tone
NOTE: The red LED light will flash when the battery is low. Please re-charge the battery at once.
