6
You can expand your one-dog Remote Trainer into a multi-dog Remote Trainer by yourself. Simply purchase extra
receive collar and add them to your system.
1.
Matching a Receiver collar.
To add a Receiver collar to your remote dog training system please follow the steps
below.
Step 1 :
Take out an unmatched receiver collar. Press and hold the “ON/OFF” button. Release after two “beeps”
sound. The receiver power is now on and the green LED flashes frequently. (
Note: never open 2 or more
unmatched receivers at the same time)
Step 2
: Take out the transmitter that you want to match receiver to. Press and hold on “
” button until the LCD
display comes on then. The transmitter is power is nowon . .
Step 3
: Press and hold the “
” button and the “
” button at the same time until the digital number on the LCD
display changes automatically then release. Now it is in the “match receiver” mode. The number changes
like “08,09,10,11……”, increasing automatically .”
Step 4
: Hold the transmitter within 50 to 100mm of the unmatched receiver.
Step 5
: Press and hold the chosen dog selection button. If you match “A” dog, Press “A” button. If you match “B”
Dog , Press “B” button. If you match “C” dog, Press “C” button. After hearing 3 “beep” sounds from receiver
and seeing the green LED flash slow down, then release.
Special note: You must confirm that you heard 3 “beeps” from the unmatched receiver and see green LED flash
slow down first and, then release dog selection button. If your matching fails, you need to cancel the
failed matched receiver first then re-match again as above.
Step 6
: Press and hold “
” button and “
” button at the same time again until the digital number on the LCD
displays no change, then release.
Step 7
: Test matched Receiver---Choose the dog first, then press “
” button and you can hear the “beep” sound
from the matched receiver. Congratulations! You have matched the receiver successfully.
Note: After matching a receive collar, the dog selection button will return to “A’ default. Before testing the
matched collar, Please chose the correct dog first.
2.
To Cancel a Matched Receiver.
Follow steps below, one by one, to cancel the matched Receiver:
Step 1:
Take out a matched receiver. Press and hold the “ON/OFF” button. After two “beep” sounds the receiver is
power on and the green LED flashes once every 5 seconds.
Step 2
: Press and hold the “
” button on the transmitter until LCD display turns on then release. The Transmitter
power is now on.
Step 3
: Press and hold the “
” button and the “
” button at the same time until the digital number on the LCD
display changes automatically, then release. You have now entered the cancel matched receiver mode. The
number changes like “08,09,10,11……”, increasing automatically.
Step 4
: Hold the Receive Collar 50 to 100mm from the transmitter, press any dog selection Button once. You can
hear 2 “beep” sounds from receiver.
Step 5
: Press and hold the “
” button and the “
” button at the same time again until the digital number on
the LCD display no longer changes then release. This exits the cancel matched receiver mode.
Step 6
: The yellow LED of Receiver flashes frequently. Congratulations! You have cancelled the matched Receiver
successfully.
