- 27 -
CHARGING
Do not charge batteries in hot or too cold areas, keep far away
from fire.
1
.
Lift the rubber cover protecting the DC Charging Jack.
2
.
Connect the corresponding charge connector to the DC
Charging Jack.
3
.
Plug the USB Adaptor into a power source.
4
.
Charge the Remote Transmitter for 2 hours for the first charge
and every charge thereafter.
Using Li
-
Ion technology, the Transmitter and receiver only requires a 2 hour
charge. It is not harmful to let the unit charge for more than 2 hours.
1.
Receiver collar charging
The Red LED Light Flashing=Lower Power
The Red LED light is on=Charging
The Green LED light is on=
Full Charged (Charger still connected)
2.
Transmitter Charging
The Red LED Light Flashing=Lower Power
The Red LED light is on=Charging
The Green LED light is on=
Full Charged (Charger still connected)
NOTE: IF THE RECEIVER AND TRANSMITTER DOESN’T TURN ON
PLEASE CONTACT US FOR A NEW BATTERY OR CHARGER.
Summary of Contents for DTC-2000-1
