MGG DTC-2000-1, Operation Manual

Page: 23 / 43

- 22 -
T
ake out the transmitter that you want to match to the
receiver. Press and hold on the “ ” button until LED
display occurs then release, the transmitter is now on.
( NOTE: Never open 2 or more unmatched receivers at the same time.)
STEP 2:
I f you want to match the 1 st dog , please choose first
dog ,The LED display “ 1 ”
I f you want to match the 2
nd
dog , please choose the
second dog , the LED display “ 2 ”
STEP 3:
Hold the transmitter close to the unmatched receiver 1 to 2
inches away. Press and hold the Vibration button and
Highlight Led button at the same time until the LED
display is “
P
”. Not to release the 2 buttons.
STEP 4:
Once hearing 5 “beeps” sound from the receiver. The
receiver matched and will begin flashing Green Led Light
once every 4 - 5 seconds. Then release the button.
(NOTE: If the receiver didn’t connect, please repeat the STEP3 to STEP 4. Try
to close to the receiver from different direction and more close.)
STEP 5:
Test matched Receiver Functions