2
www.mgfcompressors.it
–
3.
PACKAGING/STORAGE
The machine is packaged in a cardboard box for transport. All optional components (pipes, filters, fittings,
etc.) are placed with the machine, in the same cardboard box. When storing the machine, make sure the
surrounding temperature remains included between
–
15
°
and 40
°
C. Also make sure the humidity values
in the storage area remain included between 30 and 80%.
4.
INSPECTION OF PURCHASED PRODUCT
Whenreceiving the machine check that:
- The package is intact and without damages.
- All the documentation, necessary for the correct installation and use of the machine, is present.
- The pipe does not present damages or cuts which could compromise its functioning.
In case of damages inform the reseller.
Packaging content:
-
1 turbine, complete with shoulder belt
-
1 flexible hose of 3 meters
-
1 professional airbrush, complete with plastic airbrush holder to be fixed on the turbine
-
1 instruction manual
5.
MACHINE DESCTRIPTION
Turbine machine for nebulizing, able to supply a great low-pressure air volume (HVLP), characterized by great
practicality, versatility and simplicity of use.
6.
DESCRIPTIVE DRAWING
1.
Power on switch
2.
Rating label
3.
–
4.
Motor air filters
5.
Air supply tube
6.
Air supply tube (spray gun)
7.
Spray gun/Airbrush
8.
Supply cable
9.
Transport handle
7.
TECHNICAL CHARACTERISTICS
The blowing unit is fed by a single-phase electric voltage between 220-230/240W and 50/60Hz. The fan
coupled motor generates an air flow which, canalized into the feed pipe, reaches the spray gun nozzle. The
high volume at low pressure provides the pulverization of the disinfection product and, wrapped at the same
time by the air blast, deposits it in a “soft” and precise way on the support which has to be treated. Therefore
the system allows to prevent or restrict the “fog effect”, thus reducing the dispersal of the sprayed materials
in the air. The performance is therefore improved, and this also helps the operator’s health and the
environment. The machine also produces hot and dry air (by reducing the relative humidity of about 40%),
thus providing a better and faster drying of the material, especially in case of synthetic enamels.
All components are of high quality and purpose-made.
8.
IDENTIFICATION
The manufacturer identification and CE conformity plate is placed on the front panel.
The plate must not be removed for any reason.
9.
DANGEROUS AND IMPROPER USES
The original configuration of the spraying machine cannot be changed at all.
Original accessories
and spare parts always guarantee all safety regulations.
the use of unit in a different way than indicated by the manufacturer could damage the equipment
and endanger the operator. The unit is not designed to use dangerous, explosive materials and
herbicides.
