USER GUIDE
Pneumatic Blind Stapler
TOP SP P, TOP B P
Page:
7
Version:
0711
ET 572
Page 7 of 10 18.10.11 P:\Technik\TOP\Bedienungsanleitung\Englisch\Operation Instructions TOP P 0711.DOC
•
Never perform a stapling without cardboard. Only lift the machine from the cardboard box after the
stapling process has been completed.
•
Do not staple on a hard underlay.
•
Should a staple failure arise, correct it immediately and do not trigger any further stapling.
•
Shut down the machine after use. If possible, the TOP blind stapler should be suspended over the
packaging center. Available accessories:
B 2/4 Balancer (weight equalization) with a swivelling load hook
DS DS 75 spiral compressed air hose with an extended length of 7.5 m
W/EINH maintenance unit consisting of a pressure regulator, water separator and an oil vaporizer
•
Periodically clean the cardboard dust from the TOP blind stapler - preferably with a blowgun.
7 Decommissioning
If the unit is not used for a prolonged period of time, disconnect the air supply and extract the staples.
Notice of residual risks
Protect the machine from moisture!
Do not operate the machine in a humid environment!
Only operate the machine within buildings!
Compressed air connections should be checked regularly.
When working on pressurized air connections and hoses the stapler must be
depressurized.
8
Maintenance and care
The stapling machine does not require a great deal of care, but should be cleaned and maintained on a
regular basis. Soiling should be removed directly by the operator after the machining processes.
Any alterations to the stapling machine especially to the safety equipment - are
prohibited!
