31
Because the STE02W alarm notifies you by sending an e-mail, you should verify at same
time all conditions set for signals state, which must keep at least for a period of time equal
to the second set in the ‘Trigger Interval’ (maximum of 99999 seconds).
This message alert can be sent multiple times until alarm is active simply by activating
check-box ‘Enable reminder notications’ with a settable interval in ‘Reminder Interval’ field.
Alarm on Pattern Match. Selecting this control mode, ‘Pattern’ field is enable. In this field
you must enter a string of maximum ten characters that will trigger the alarm condition
when it transits on the serial port of STE02W.
According to this type of configuration, the following options in this screen will be disabled.
Press ‘Save’ button to confirm changes.
Figure 30: Alarm on Pattern Match
