Petrol Powered Backpack Blower
E&OE
©2017 MTM
6
Assembly
Note
: Place the hose clamps over the flexible tube before connecting it. • Place the unit on a flat surface
during assembly.
1. Slide the flexible tube (
B
) over the fan outlet tube (
A
) and secure it using a hose clamp (
C
). Firmly
tighten the clamp.
Note
: Keep the throttle cable as straight as possible when connecting the blower tubes. • Ensure the hose
clamp screw is positioned away from the operator.
2. Slide the flexible tube (
B
) over the control tube (
E
).
3. Rotate the control tube so that the alignment mark (
D
) and throttle handle (
F
) are aligned, then secure
the tubes using a hose clamp (
G
). Firmly tighten the clamp.
4. Attach the throttle linkage clips to both ends of the flexible tube to secure the throttle cable.
5. Connect the intermediate tube (
H
) and air nozzle (
I
) by pushing them together and turning them
clockwise so that they lock.
