MFJ-9200 Quick Reference Menu:
MEM-VFO
RIT-MODE
BL
CALL
AF GAIN
ATT
TUNE
POWER
Key-Paddle
Phone
Ant
Power
ON
1
2
3
Connections:
Power:
2.1-mm plug, grounded sleeve, positive (+) center, supply 8-15 VDC @ 1.5A.
Antenna:
BNC male or BNC-UHF adapter, 50-Ohms unbalanced, SWR 2:1 or less.
Paddle:
3.5-mm plug, dot to tip, dash to ring, ground to sleeve.
Straight Key:
Contactor to tip, ground to ring, ground to sleeve (or use a mono plug).
Headphone:
3.5-mm stereo, right channel to tip, left channel to ring, ground to sleeve.
Display Window:
Segment 1:
RX Mode [
CW
] or [
USB, LSB
], supply voltage flashes every 4 seconds -
Ex [
12.6
]
Segment 2:
[
V
] = VFO mode, [
M
] = Memory mode, [
1-8
] = number of memory channel
Segment 3:
Frequency Display
,
100-Hz readout normal, 10-Hz with RIT.
Control Switch Functions:
MEM-VFO:
Tap
for [
M
] or [
V
]
Press
to enter displayed frequency to memory:
VFO
Æ
MEM
TUNE:
ROTATE
TO TUNE VFO FREQUENCY OR TO SCROLL MEMORY
CHANNELS [
1-8
].
TAP
TO TOGGLE FINE-TUNE RATE (100 HZ, 1 KHZ).
PRESS
TO ENTER OR EXIT FAST TUNE RATE (100 KHZ).
ATT:
TAP
TO TOGGLE 20-DB ATTENUATOR ON OR OFF.
BL:
TAP
TO TOGGLE BACKLIGHT ON OR OFF.
CALL:
TAP
TO CALL AUTO-CQ.