background image

Warrantee 

 

If manufactured by MFJ Enterprises, Inc. and purchased from an authorized dealer or directly 
from MFJ, we warrant to the original owner that this product shall be free from defects in material 
and workmanship for a period of 12 months from date-of-purchase provided the following terms 
and conditions are satisfied: 
 
1. The purchaser must retain a dated proof-of-purchase (bill of sale, cancelled check, credit card 
or money order receipt, etc.) describing the product so as to establish the validity of the warranty 
claim. In addition, the original copy or machine reproduction of such proof shall be provided to 
MFJ at the time of warranty service. MFJ shall have the discretion to deny warranty service 
without dated proof-of-purchase. Any evidence of alteration, erasure, or forgery shall be 
cause to void any and all warranty terms immediately. 
 
2. MFJ agrees to repair or replace, at its option and without charge to the original 
owner, any defective product under warranty, provided the product is returned postage prepaid to 
MFJ Enterprises, Inc. with a personal check, cashiers check, or money order in the amount of 
$7.00 to cover postage and handling. 
 
3. MFJ Enterprises, Inc. will supply any replacement parts free of charge for any MFJ product 
under warranty upon request. A dated proof-of-purchase and a $5.00 personal check, cashiers 
check, or money order must be provided to cover postage and handling for parts and materials. 
 
4. This warranty 

shall not be voided 

for owners who attempt to repair defective units. Technical 

consultation is available by calling (662) 323-5869. 
 
5. This warranty does not apply to kits sold by or manufactured by MFJ Enterprises, Inc. (once 
assembly begins, the owner becomes the manufacturer). 
 
6. Wired and tested PC board products are covered by this warranty provided only the wired and 
tested PC board product is returned. Wired and tested PC boards installed in the owner’s own 
cabinet or connected to switches, jacks, or cables, etc. and sent to MFJ Enterprises, Inc. will be 
returned at the owner’s expense un-repaired. 
 
7. Under no circumstances shall MFJ Enterprises, Inc. be liable for consequential damages to 
persons or property by the use of any MFJ products. 
 
8. Out-of-warranty Service: MFJ Enterprises, Inc. will repair any out-of-warranty product provided 
the unit is shipped prepaid. All repaired units will be shipped COD to the owner. Repair charges 
will be added to the COD fee unless other arrangements are made. 
  
9. This warranty is given in lieu of any other warranty expressed or implied. 
 
10. MFJ Enterprises, Inc. reserves the right to make changes or improvements in the design or 
manufacture of its products without incurring any obligation to install such changes upon products 
previously manufactured. 
 
11. All MFJ products to be serviced in-warranty or out-of-warranty should be addressed to MFJ 
Enterprises, Inc., 300 Industrial Park Road, Starkville, Mississippi 39759, USA and must be 
accompanied by a letter describing the problem in detail along with a copy of a dated proof-of-
purchase. 
 
12. This warranty conveys specific rights, and you may also be entitled to other rights which may 
vary from state to state.  

Summary of Contents for MFJ-1835









Reviews: