Top View
Cross Tube
Disassemble the U-bolt set and attach the cross
tube to the main radiator just above the bolt at
the bottom insulator. About ½ inch above the
bolt will be fine. Orentation of the cross tube
does not matter
Use a split washer and a 10-24 nut to secure the Balun to the
mast bracket. Route the upper coax to the center feed point
of the antenna. Connect the center conductor eyelet to the
top section of the antenna and the shield to the lower part of
the antenna.
25 U-bolt set
26 Cross tube
27 Balun Assembly
28 10-24 nut
29 #10 split washer
6 Two 1/4-20 nuts
5 Two 1/4-20 split washers
30 Two 4-40 nuts with keep washer
5
6
25
26
28
29
30
