8
9
10
11
9
10
Stub Assembly
Parts needed for this assembly
8. Two double brackets made out of aluminum
9. Twelve 6-32 x ½ phillips head screws
10. Twenty four 6-32 nuts with built in lock washers.
11. Four single brackets made out of ABS plastic
12. Twelve half clamps made out of aluminum.
13. Twelve 6-32 x 1-½ long phillips head screws
14. Two threaded rods for 2 meters (short)
15. Two threaded rods for 6 meters (long)
16. Eight 10-32 nuts
17. Eight #10 split washers.
12
12
Use the 6-32 x ½ inch screws and 6-32 nuts to attach a half clamp
to each bracket as shown.
13
10
12
12
13
10
Two of these
Four of these
Install the brackets onto the main radiator in the places shown.
Place the double brackets about ½ inch from the bolts.
Install the 2 and 6 meter stubs using the 10-32 bolts and washers.
Place the insulating plastic brackets about 4 inches from the end
of each stub for support.
½ inch
6mtr stub
2mtr stub
16
17
14
15
14
15
