mFi MASON-LITE MFP- 75 Instructions Manual Download Page 22

 

21 

Limited Lifetime Warranty 

Mason-Lite Fireplace: Model MFP-75 

 

Masonry Fireplaces Industries, LLC (MFI) warrants all Mason-Lite Fireplaces to be free from defects in materials that adversely affect 

fireplace performance for the lifetime of the product from the date of purchase, subject to the terms and conditions of this limited 

warranty. MFI does not warrant accessory chimney, outside air ducts and devices not manufactured by MFI. 

 

This warranty covers only products manufactured by MFI, specifically the modular concrete firebox, and 

NO WARRANTY, EXPRESS OR 

IMPLIED, EXTENDS TO ANY OF THE HARDWARE, FOUNDATION, VENTING, DUCTS, OR 

ACCESSORIES. THIS WARRANTY DOES NOT COVER DRAFTING, SMOKING, OR SOOTING OF THE FIREPLACE SYSTEM. 

Factors beyond 

the manufacturer’s control affect drafting, smoking, and sooting and MFI cannot

 

guarantee these aspects of performance. 

 

Coverage under this warranty is subject to the following conditions and exclusions: 

 

This warranty is null and void when the fireplaces are not installed pursuant to the installation instructions provided by MFI or 
local building codes have not been followed completely. 

 

Glass is warranted against thermal breakage only and only on models that are manufactured by MFI with a glass front. On Direct 
Vent models the safety glass or safety screen must be kept in front of this glass when fireplace is in use. Safety screen must be 
used on all models when in use. 

 

This warranty does not apply to any component or part that shows evidence of misuse, abuse, improper installation, accident or 
lack of regular maintenance. 

MFI is not responsible for misuse or mishandling of component parts.

 

 

This warranty does not apply to any damage sustained to the appliance while in transit. 

 

Neither 

MFI, nor any affiliate thereof, is responsible for any labor costs or indirect costs incurred for the replacement of defective 

components

. Any covered component that, in our judgment, is defective shall be repaired, replaced or

 

refunded at MFI’s option.

 

 

Nothing in this warranty makes MFI, or any affiliate thereof, liable in any respect for any injury or damage to the building or 
structure in which the fireplace has been installed or to the persons or property therein arising out of the use, misuse, or 
installation of properly manufactured MFI products

.

 

 

The fireplace must be used in accordance with operating instructions. The grate or andirons must be installed when using the 
fireplace. 

NEITHER MFI, NOR ANY AFFILIATE THEREOF, SHALL BE HELD LIABLE FOR ANY INCIDENTAL OR 

CONSEQUENTIAL DAMAGES OR EXPENSES ARISING OUT OF THE USE OF THE FIREPLACE. ALL SUCH 

DAMAGES AND EXPENSES ARE HEREBY EXCLUDED. 

Some states do not allow the exclusion or limitation of incidental or consequential 

damages, so the above limitation or exclusion may not apply to you. 

 

If a component is found to be defective under the terms of this warranty the party this warranty is extended shall, notify MFI, 315 W. 

3rd Street, Santa Ana, CA 92701 in writing, by registered mail, within thirty (30) days following the discovery of the defect within the 

lifetime warranty period. The letter shall include proof of purchase and state the (1) date of purchase, model number and serial 

number; (2) place of purchase; (3) address of installation; (4) name, address and phone number of the homeowner; and (5) a brief 

description of the defect. 

 

This warranty applies only to those fireplaces installed in the continental United States, Alaska and Canada. If any part of this warranty 

is found to be unenforceable, the remaining parts shall remain in force and effect. 

 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, TERMS OR CONDITIONS, EXPRESS OR IMPLIED 

EITHER IN FACT OR BY OPERATION OF LAW. MFI HEREBY DISCLAIMS ALL GUARANTEES AND WARRANTIES, EXPRESS OR IMPLIED, 

BEYOND THE WARRANTIES SET FORTH HEREIN, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR 

A PARTICULAR PURPOSE. 

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not 

apply to you. 

 

Revision date: 3/1/2012 

MASONRY FIREPLACE INDUSTRIES, LLC 

6391 Jurupa Ave., Riverside, California 92514 

Telephone (800) 345-7078  Fax (951) 588-8046 

 

Date of Purchase ____________________20_____ 

 

Serial # ____________________ 

Summary of Contents for MASON-LITE MFP- 75























Reviews: