mFi Mason-Lite LMFP-108 Instructions Manual Download Page 37

37

Lifetime  Limited Warranty

Mason-Lite Appliances

Masonry Fireplace Industries, Inc. warrants all Mason-Lite Appliances to be free from defects in materials that adversely affect appliance 

performance for the lifetime of the product from the date of purchase, subject to the terms and conditions of this limited warranty. Masonry 

Fireplace Industries does not warrant accessory chimney, outside air ducts and devices not manufactured by Masonry Fireplace Industries.

This warranty covers only products manufactured by Masonry Fireplace Industries, specifically the modular concrete firebox, and 

NO 

WARRANTY, EXPRESS OR IMPLIED, EXTENDS TO ANY OF THE HARDWARE, FOUNDATION, VENTING, DUCTS, OR 

ACCESSORIES. THIS WARRANTY DOES NOT COVER DRAFTING, SMOKING, OR SOOTING OF THE APPLIANCE 

SYSTEM

.  Factors beyond the manufacturer’s control affect drafting, smoking, and sooting and Masonry Fireplace Industries cannot guarantee 

these aspects of performance.

Coverage under this warranty is subject to the following conditions and exclusions:

• 

This warranty is null and void when the appliances are not installed pursuant to the installation instructions provided by Masonry 

Fireplace Industries or local building codes have not been followed completely.

• 

This warranty does not apply to any component or part that shows evidence of misuse, abuse, improper installation, accident or lack of 

regular maintenance.  Masonry Fireplace Industries is not responsible for misuse or mishandling of component parts.

• 

This warranty does not apply to any damage sustained to the appliance while in transit.

• 

Neither Masonry Fireplace Industries, nor any affiliate thereof, is responsible for any labor costs or indirect costs incurred for the 

replacement of defective components.  Any covered component that, in our judgment, is defective shall be repaired, replaced or refunded 

at Masonry Fireplace Industrie’s option.

• 

Nothing in this warranty makes Masonry Fireplace Industries, or any affiliate thereof, liable in any respect for any injury or damage to 

the building or structure in which the appliance has been installed or to the persons or property therein arising out of the use, misuse, or 

installation of properly manufactured Masonry Fireplace Industries products.

• 

The appliance must be used in accordance with operating instructions. Only approved Burners and Glass Doors must be installed when 

using the appliance. 

NEITHER MASONRY FIREPLACE INDUSTRIES, NOR ANY AFFILIATE THEREOF, SHALL BE HELD LIABLE FOR ANY 

INCIDENTAL OR CONSEQUENTIAL DAMAGES OR EXPENSES ARISING OUT OF THE USE OF THE APPLIANCE. ALL 

SUCH DAMAGES AND EXPENSES ARE HEREBY EXCLUDED. Some states do not allow the exclusion or limitation of incidental or 

consequential damages, so the above limitation or exclusion may not apply to you.

If a component is found to be defective under the terms of this warranty, the party this warranty is extended to shall notify Masonry Fireplace 

Industries, 

6391 Jurupa Ave., Riverside, California 92514

 in writing, by registered mail, within thirty (30) days following the discovery 

of the defect within the lifetime warranty period. The letter shall include proof of purchase and state the (1) date of purchase, model number 

and serial number ; (2) place of purchase; (3) address of installation; (4) name, address and phone number of the homeowner; and (5) a brief 

description of the defect.

This warranty applies only to those appliances installed in the continental United States, Alaska and Canada. If any part of this warranty is 

found to be unenforceable, the remaining parts shall remain in force and effect.

Electronic valves and modules are limited to only one year warranty under the valve and electronic parts manufacturers warranty.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ALL OTHER WARRANTIES, TERMS OR CONDITIONS, 

EXPRESS OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW.  MASONRY FIREPLACE INDUSTRIES HEREBY 

DISCLAIMS ALL GUARANTEES AND WARRANTIES, EXPRESS OR IMPLIED, BEYOND THE WARRANTIES SET FORTH HEREIN, 

INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some 

states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.

Revision date: 5/4/2019

Masonry Fireplace Industries Inc.

6391 Jurupa Ave., Riverside, California 92514

Telephone (800) 345-7078  Fax (951) 588-8046

Summary of Contents for Mason-Lite LMFP-108






































Reviews: