MFC SPEED CREED, Operations & Parts Manual

Page: 9 / 68

REV.03_9/2021 7
Machine Specifications
MACHINE
Machine weight (15’): 3,537 lbs. [1604kg]
Approximate weight per foot for additions: 119 lbs. [54kg]
Hydraulic Oil Reservoir (ISO 46): 10 gallons [37.85L]
Available machine lengths (in 1’ increments): 10’-30’ [3m-9.1m]
Fuel Reservoir: 12 gal. [45.42L]
HYDRAULIC SYSTEM
Hydraulic motor attachment to each tube: Direct drive via keyed bushing & bolt flange
Roller tube controls: Independent electronic variable speed
control to drive rollers & slinger roller
Drive roller speed: 0’-125’ Per minute [0-.64mps]
Slinger roller speed: 150 rpm
Kickstand travel: 16” [406mm]
Kickstand extend speed: 1.2” per second [30.5 mm/s]
Kickstand retract speed: 1.8” per second [45.7 mm/s]
An electronically controlled tandem pump systemdrives the drive and slinger rollers
independently. The kickstand is standard on all machines and is controlled via two buttons at
the top of the drive roller joystick. It includes a monitoring light to indicate when the kickstand is
fully extended / retracted.
ROLLER/SLINGER TUBES
Diameter: 8” SCH.40 Pipe (Ø8.625”) [Ø219.1mm]
Wall thickness: 0.322” [8.18mm]
Weight per foot: 28.55 lbs. [12.95kg]
SUPPORT FRAMES
Frame Extension Size Qty. Horizontal Support Tubes Weight
5’ frame extension: 2 155 lbs. [70.3kg]
6’ frame extension: 3 198 lbs. [89.8kg]
7’ frame extension: 4 240 lbs. [108.8kg]
8’ frame extension: 4 260 lbs. [117.9kg]
9’ frame extension: 5 302 lbs. [137.0kg]
10’ frame extension: 5 321 lbs. [145.6kg]
All frame sections are made from 2”x6”x1/8” and 2”x2”x1/8” steel tubes with 3/8” bolt plates.
Operator work platform comes standard, and an Idler end platform and/or counterweight is
available as an optional accessory.
SPRAY SYSTEM
Tank capacity: 50 gal. [189.27L]
Nozzles per feet: Approx. 0.5 (depending on machine length)
Hose attachment: Included w/ hand spray nozzle & hose reel